ASTM A333 Pipes Gr. 1 / 3 / 6 Low temperature carbon Steel Pipes
ASTM A333 Seamless Pressure Pipe (also known as ASME A333 pipes) is commonly used in the construction of oil and gas refineries, power plants, petrochemical plants, boilers, and ships where the piping must transport fluids and gasses that exhibit Low temperatures and pressure levels.
ASTM A333 Pipes Specification
Port: JNPT PORT, MUMBAI (INDIA)
Payment Terms: L/C, T/T, Western Union
Size (Seamless): 1/2″ NB – 24″ NB
Schedule 20 – Schedule XXS (heavier on request) up to 250 mm thk.
|Element||Grade 1||Grade 3||Grade 6|
|Manganese||0.40 – 1.06||0.31 – 0.64||0.29 – 1.06|
|Silicon||0.18 -0.37||0.10 min|
|Nickel||3.18 – 3.82|
For each reduction of 0.01% carbon below 0.30%, an increase of 0.05% manganese above 1.06% would be permitted to a maximum of 1.35% manganese.
When Grade 6 is ordered under this specification, supplying an alloy grade that specifically requires the addition of any element other than those listed for the ordered grade is not permitted. However, the addition of elements required for the deoxidation of the steel is permitted.
he material shall conform to the requirements as proscribed:
|Grade 1||Grade 3||Grade 6|
|Tensile Strength, min||55,000||380||65,000||450||60,000||415|
|Yield Strength, min||30,000||205||35,000||240||35,000||240|
|Elongation in 2 in. or 50 mm, (or 4D), min, %:|
|Basic minimum elongation for walls 5/16 in. [8 mm] and over in thickness, strip tests, and for all small sizes tested in full section||35||35||30||20||30||16.5|
|When the standard round 2-in. or 50-mm gage length or proportionally smaller size test specimen with the gage length equal to 4D (4 times the diameter) is used||28||20||22||14||22||12|
|For strip tests, a deduction for each 1/32in. [0.8 mm] decrease in wall thickness below 5/16 in. [8 mm] from the basic minimum elongation of the following percentage||1.75||1.25||1.50||1.00||1.50||1.00|
|Elongation in 2 in. or 50 mm, min, %:|
|Wall Thickness||Grade 1||Grade 3||Grade 6|
For Grades 1, 3 and 6, the notched-bar impact properties of each set of three impact specimens, including specimens for the welded joint in welded pipe with wall thicknesses of 0.120 in. [3 mm] and larger, shall not be less than the values prescribed:
|Size of Specimen, min||Minimum Average Notched Bar Impact Value of Each Set of Three Specimens||Minimum Notched Bar Impact Value of One Specimen Only of a Set||Impact Temperature|
|10 by 10||13||18||10||14||F||C|
|10 by 7.5||10||14||8||11||1||-50||-45|
|10 by 6.67||9||12||7||9||3||-150||-100|
|10 by 5||7||9||5||7||6||-50||-45|
|10 by 3.33||5||7||3||4|
|10 by 2.5||4||5||3||4|
Transverse or Longitudinal Tension Test and Flattening Test, Hardness Test, or Bend Test
For material heat treated in a batch-type furnace, tests shall be made on 5% of the pipe from each treated lot. For small lots, at least one pipe shall be tested.
For material heat treated by the continuous process, tests shall be made on a sufficient number of pipes to constitute 5% of the lot, but in no case less than 2 pipe.
Impact Test – Â One notched bar impact test, consisting of breaking three specimens shall be made from each heat represented in a heat-treatment load on specimens taken from the finished pipe.
ASTM A333 Pipes Manufacturer, Supplier & Distributor
Api line pipes is one of the biggest supplier, manufacturer and distributor of A333 Pipe.There are various companies spread throughout the world which manufacture A333 Pipe. But, only a small percentage of these companies are able to provide excellent quality pipes, and Apilinepipes is among that rare elite group.
We have been manufacturing for years and the level of expertise that has come about in this period is unmatchable. Our process is thorough and any glitch in the manufacturing process that may have presented itself in the initial stages has been overcome. Each and every pipe goes through testing to ensure that the customers are provided with only the best quality . Our pipes can also be custom made to suit the requirements of the clients.
Besides, although our price is lower than other companies, we never compromise on the quality of our products. Customer satisfaction is always our top priority.
ASTM A333 Pipes Applications
Carbon Steel Pipe are versatile in nature and can be used to transmit water, oil and natural gas. Thus, they can be used for a wide range of applications. Currently, they are mostly employed in the following industries
- Machine Building
- Oil & Gas
Packaging and Marking
As stated above, providing excellent quality of pipes has always been the highest priority here at Apilinepipes. Thus Carbon Steel Pipe are wrapped by hand, instead of machines to ensure one last time before delivery that none of the pipes are damaged or otherwise compromised.
Relevant information about the pipes such as size, material etc. are provided during the delivery of the pipes.
We have a wide variety of Carbon Steel EFW Pipe ASTM A 671 Grade CC 60 pipes in our inventory. These include seamless and welded. We keep stock of the various variants of the Carbon Steel EFW Pipe ASTM A 671 Grade CC 60. Apilinepipes ensures that the entire range is available for the convenience of their customers. We are exporters, manufacturers and stockers of Carbon Steel EFW Pipe ASTM A 671 Grade CC 60 pipes. With the right certification, we ensure that the customers gets exactly what they want. We have various grades of Astm A106 grade Pipe, Carbon Steel Welded pipe, Carbon Steel Saw Pipe, Carbon Steel Lsaw Pipe, Carbon Steel Grade B Seamless pipe,carbon Steel grade c Seamless Pipe.
|Description||GRADE||Size||SCH||Brand||PRICE PER TON IN USD|
|Carbon steel SMLS Pipe||A106, A333, X42,||1/2″ To 24″||10, 20, 30, STD, 40, 60, XS, 80, 100, 120, 140, 160, XXS||V&M Germany, Vallourac Brazil, Tenaris Italy, NSSMC JAPAN, MSL INDIA, ISMT INDIA||1200 TO 1400|
|Carbon steel SMLS Pipe||X52, X56, X60, X65, X70||1/2″ To 24″||10, 20, 30, STD, 40, 60, XS, 80, 100, 120, 140, 160, XXS||V&M Germany, Vallourac Brazil, Tenaris Italy, NSSMC JAPAN, MSL INDIA, ISMT INDIA||1400 TO 2000|
|Carbon steel ERW, LSAW, SAW, EFW Pipe||API 5L GR.B, X42,||16″ To 84″||10, 20, 30, STD, 40, 60, XS, 80, 100, 120, 140, 160, XXS||NSSMC JAPAN, JFE JAPAN, MSL INDIA, WELDPUN INDIA, ARCELOR MITTAL||800 TO 1000|
|Carbon steel ERW, LSAW, SAW, EFW Pipe||X52, X56, X60, X65, X70, A671 & A672||16″ To 84″||10, 20, 30, STD, 40, 60, XS, 80, 100, 120, 140, 160, XXS||NSSMC JAPAN, JFE JAPAN, MSL INDIA, WELDPUN INDIA, ARCELOR MITTAL||1000 TO 1300|
|ALLOY STEEL TUBE||A213 T11, T12, T5, T9, T22, T91||12.7 MM TO 168.3||2MM TO 20MM||NSSMC JAPAN, ISMT INDIA, V&M FRANCE||4200 TO 4600|
|ALLOY STEEL PIPE||A335 P5, P9, P11, P12, P22, P91, A691||1/2″ TO 24″ SMLS & 16″ TO 48″ ERW||10, 20, 30, STD, 40, 60, XS, 80, 100, 120, 140, 160, XXS||NSSMC JAPAN, ISMT INDIA, V&M FRANCE, TENARIS ITALY||3000 TO 5000|
|STAINLESS STEEL SMLS PIPE||A312 TP304, 304L, 316, 316L, 321, 347, 310||1/2″ To 16″||10, 20, 30, STD, 40, 60, XS, 80, 100, 120, 140, 160, XXS||NSSMC JAPAN / TUBACEX SPAIN / SURAJ GROUP / RATNAMANI||3800 TO 5000|
|STAINLESS STEEL ERW PIPE||A312 TP304, 304L, 316, 316L, 321, 347, 310||1/2″ To 48″||10, 20, 30, STD, 40, 60, XS, 80, 100, 120, 140, 160, XXS||NSSMC JAPAN / TUBACEX SPAIN / SURAJ GROUP / RATNAMANI||3000 TO 4000|
Origin Of Material
Cities We Reach To:
Ahmedabad, Abu Dhabi, Algiers, Ankara, Al Jubail, Atyrau, Ahvaz, Al-Khobar, Aberdeen, Bengaluru, Bangkok, Bogota, Busan, Bhopal, Brisbane, Chennai, Chandigarh, Coimbatore, Calgary, Chiyoda, Cairo, Courbevoie, Colombo, Caracas, Daman, Dallas, Dubai, Doha, Dammam, Ernakulam, Edmonton, Faridabad, Gurgaon, Geoje-si, Perth, Granada, Gimhae-si, Haryana, Houston, Hyderabad, Hanoi, Howrah, Hong Kong, Ho Chi Minh City, Indore, Istanbul, Jakarta, Jeddah, Jharkhand, Kolkata, Kuwait City, Karachi, Kuala Lumpur, Ludhiana, London, Lahore, Lagos, Los Angeles, Lucknow, La-Victoria, Mumbai, Melbourne, Madrid, Muscat, Moscow, Manama, Montreal, Mexico City, Milan, New Delhi, Navi Mumbai, Noida, New York, Pimpri-Chinchwad, Port-of-Spain, Pune, Petaling Jaya, Riyadh, Rajkot, Rio de Janeiro, Seoul, Singapore, Sharjah, Santiago, Surat, Secunderabad, Sydney, Tehran, Thiruvananthapuram, Thane, Toronto, Ulsan, Vadodara, Vung Tau, Visakhapatnam.
Countries We Reach To:
Australia, Afghanistan, Algeria, Angola, Argentina, Austria, Azerbaijan, Bangladesh, Brazil, Belarus, Belgium, Bhutan, Bolivia, Bulgaria, Bahrain, Costa Rica, Canada, Croatia, Czech Republic, Colombia, Chile, China, Denmark, Egypt, Ecuador, Ghana, Greece, Gabon, Hong Kong, Hungary, India, Indonesia, Israel, Iran, Italy, Iraq, Japan, Kuwait, Kazakhstan, Kenya, Libya, Lithuania, Lebanon, Morocco, Mongolia, Mexico, Mexico, Malaysia, Nigeria, Norway, Netherlands, Nigeria, New Zealand, Oman, Philippines, Poland, Pakistan, Peru, Estonia, France, Finland, Poland, Portugal, Qatar, Romania, Russia, Spain, Serbia, Singapore, Sri Lanka, South Africa, South Korea, Switzerland, Sweden, Slovakia, Saudi Arabia, Taiwan, Turkey, Thailand, Trinidad & Tobago, Tunisia, United States, Ukraine, United Arab Emirates, United Kingdom, Venezuela, Vietnam, Yemen.